Sometimes a heating or cooling system needs one thing fixed and nothing else. A flame sensor that has corroded, a refrigerant charge that has dropped, a blower motor that is drawing too much current: each of those is a repair, and when the rest of the system is sound, a repair is the right call. We handle those jobs for homes and rental properties throughout Luxemburg and Kewaunee County, and we handle them the same way every time: diagnose first, explain what we found, confirm the repair before any work starts.
Other times the system itself is the problem. Equipment that has cycled through too many Wisconsin winters, a heat exchanger that has seen better days, or a unit that simply cannot keep up with the load anymore. In those cases we walk through what replacement involves and what it costs before anything is decided.
Call us at (920) 691-5628 and we will tell you which situation you are in.
The price of any HVAC job depends on what the system actually needs, and that is not always clear until someone has looked at it. A repair call covers the diagnostic first. From there, the cost is shaped by what the fault turns out to be, how accessible the component is, and whether the right answer is a repair or a replacement. A failed igniter on an otherwise healthy furnace is a different job from a cracked heat exchanger on a unit that has been running hard for years.
Replacement quotes take into account the size of the space being conditioned, the existing ductwork, and what kind of equipment makes sense for the property. A home in this part of Wisconsin that heats primarily with a gas furnace has different considerations than one that is moving to a cold-climate heat pump for the first time. Those factors all affect what the job runs.
You get the rate for the service call on the phone before anything is scheduled. Once the technician who comes out has assessed the system, the repair scope and the cost are confirmed before work begins. Nothing proceeds without that conversation. Call us and we'll walk you through your options.
When one part of a house is comfortable and another is always too cold or too warm, the cause is usually in the duct system, the air handler, or both. Leaking ducts, a damper that has shifted, or a blower that is not moving enough air are the common findings. We check the airflow side of the system when the symptoms point that way, because adjusting the equipment without addressing the distribution rarely solves the problem.
A furnace that starts and then shuts off, or one that will not light at all, is often dealing with a failed igniter or a flame sensor that has built up enough residue to stop reading correctly. These are among the more common no-heat calls we take in the region, and the repair is usually straightforward once the right component is confirmed. The diagnostic covers both, along with the gas valve behavior and the control board, so the repair addresses the actual fault rather than the most likely one.
An air conditioner that runs without cooling the space, or one that ices over on the refrigerant lines, is often dealing with a refrigerant charge that has dropped. Low refrigerant is almost always the result of a leak rather than consumption, so the diagnostic involves finding where the system is losing charge before adding refrigerant makes any sense. We locate the leak, explain what the repair involves, and confirm the approach before any work proceeds.
A burning smell at startup can mean dust burning off a heat exchanger after a long off-season, or it can mean something more serious in the electrical controls or the blower motor. A musty smell usually points to the evaporator coil or the ductwork, where moisture has created conditions for mold or mildew to develop. Neither smell should be ignored. Evaporator coil cleaning is part of what we cover when the symptoms point that way, and the air handler and blower get checked whenever the call involves an odor.
We are available at any hour, any day, including weekends and holidays. A no-heat situation in a Kewaunee County winter is not something that waits, and we take those calls seriously around the clock. When you call, the job is scoped on the phone so the visit is set up correctly before anyone comes out.
Seasonal maintenance and tune-ups are worth scheduling before the heating or cooling season they serve, and we work around the schedules of occupied properties. For landlords managing rental units in Luxemburg, that means coordinating the visit with whoever is on-site rather than requiring the property owner to be there. We confirm what the visit covers on the call and work around what the property needs.
Real experience. Local knowledge. Comfort is the job.
A ductless mini-split is the right answer for spaces that existing ductwork does not reach. An addition built onto a house, a converted garage, a room above a detached structure, or a space that was never properly tied into the central system: these are the situations where running new duct is either impractical or more expensive than the alternative. A mini-split handles heating and cooling independently for that zone, without touching the rest of the system.
We size and install both single-zone and multi-zone ductless systems. Cold-climate models now operate efficiently at temperatures well below freezing, which makes them a practical heating option for this region rather than just a supplemental one. For homes that want to reduce their dependence on a single fuel source, pairing a mini-split with an existing furnace gives the property two independent systems rather than one point of failure. If you want the longer version, it is on our page listing every HVAC service.
A system that has a single failed component, is otherwise running well, and has not needed repeated work over the past few seasons is usually worth repairing. The age of the equipment matters, but age alone is not the deciding factor. A furnace that has been maintained and has a clean heat exchanger may have years of useful life left even if it is not new. We assess the equipment honestly and tell you what we find.
Repair stops making sense when the cost of the fix approaches a significant share of what a replacement would run, or when the same system has needed attention repeatedly over a short period. A cracked heat exchanger, a compressor failure on older refrigerant equipment, or a unit that can no longer meet the heating load are all situations where replacement is worth a serious look. Older homes in a town this size often have equipment that has been running for a long time without a full assessment, and a replacement conversation is sometimes the first honest look the system has had in years.
We will look at the system and tell you what it needs. If repair is the answer, we say so. If it is not, we explain why and walk through what replacement involves before anything is decided.
We serve Luxemburg and the surrounding area throughout Kewaunee County. The communities we cover regularly include Casco, Dyckesville, Kewaunee, Algoma, and Bellevue. If your property is in this part of the county, the call works the same way regardless of which town you are in.
Residential homes, rental properties, and small commercial spaces are all work we handle in this area.
Call (920) 691-5628 and we will confirm coverage for your address before anything is scheduled.
Switch the system off at the thermostat and call (920) 691-5628 immediately.
A burning smell can indicate an electrical fault, an overheating motor, or debris on a heat exchanger, and none of those should be left running. Do not restart the system until the cause has been identified.
We confirm what the schedule allows when you call. We do not promise a specific arrival time on this page, but we can discuss what the booking looks like and what options are available at the time you call.
Coverage is the same across the area we serve, and being in a smaller town does not affect how a call is handled or how a visit is arranged. We take emergency no-heat and no-cool calls seriously at any hour, any day of the year, for every property in Kewaunee County.
Call (920) 691-5628 and we will confirm what the schedule allows.
A system that has not been serviced in a long time is worth a diagnostic visit before a replacement decision is made, because the condition of the heat exchanger and the key components may be better than expected, or the visit may confirm that replacement is the right call. Either way, you make the decision with the actual findings in front of you rather than on a guess.
Call (920) 691-5628 and we will scope the visit on the phone before anything is scheduled.
You hear what the repair involves before you agree to it. That is how every call goes: the job is scoped on the phone, the rate for the service visit is confirmed, and the repair is explained and agreed before any work starts. By the time you hang up, you know what the visit covers, what it costs to get someone out, and what to expect when the technician who comes out looks at the system.
Call (920) 691-5628.
We will ask about the equipment, what it is doing, and how long it has been doing it. That is what it takes to set the visit up correctly. Call Howard HVAC Company and have that conversation now.
Browse our full area list. Nearby, we also cover: Bellevue, Green Bay, Allouez, Suamico, Ashwaubenon.
Below is a plain-language look at the heating and cooling work we handle for homes and commercial properties in Luxemburg and across Kewaunee County. Each row covers what the service involves, who it fits best, and one practical thing worth knowing before you call. Read through, find what matches your situation, and give us a call for a quote.
| Service | What the Service Includes | Best Suited For | Good to Know |
|---|---|---|---|
| HVAC System Installation & ReplacementMost Popular | Equipment sizing and selection, Full system removal and installation, Ductwork compatibility check | Homeowners and property managers replacing aging or failing equipment | Sizing matters as much as brand. An oversized system short-cycles and an undersized one runs constantly. We assess the space before recommending equipment. |
| Indoor Air Quality & Air Filtration | Whole-home filtration system installation, Air purifier integration with existing HVAC, Filter media selection and setup | Tightly sealed homes where allergens, particles, or odors are a concern | Wisconsin winters mean windows stay closed for months. A whole-home filtration system works through the existing HVAC rather than treating one room at a time. |
| Ductwork Repair & Sealing | Leak location and sealing, Airflow verification after sealing, Duct condition assessment | Homes with uneven temperatures or energy bills that have climbed without explanation | Leaking ducts are a common finding in older Luxemburg homes. Sealing them often costs less than expected and produces a noticeable comfort improvement. |
Call us at (920) 691-5628 and we will walk you through your options, explain what the visit covers, and get the work scheduled.
(920) 691-5628